OVERLKD
Tools / Build Compatibility
PC BUILD TOOL

PC Build Compatibility Checker

Pick your parts and instantly check whether your build works together before you buy anything.

Select components

This checker is built for real compatibility questions: CPU and motherboard fit, RAM support, PSU headroom, GPU connectors, and case clearance.

Note: This tool checks technical compatibility and sensible headroom. It is not a substitute for niche workstation validation and does not show prices.

Overall verdict
Compatible
Estimated system draw: 335W | Recommended PSU: 550W

Share this build

Your current selection is encoded into a short share link. We keep raw URLs off-page for clean UX.

Compatibility checks

  • CPU and motherboard socket
    AM5 matches on both parts.
  • RAM type and speed
    DDR5 is compatible and 5600MHz is within board support.
  • Motherboard form factor in case
    mATX motherboard fits this case.
  • GPU length clearance
    250mm GPU fits under 330mm clearance.
  • CPU cooler fit and capacity
    Socket support, cooler height, and thermal headroom are all compatible.
  • PSU wattage headroom
    650W provides healthy headroom (recommended 550W).
  • GPU power connector support
    GPU power connector requirements are covered.
  • CPU EPS power connectors
    Motherboard expects 1x EPS 8-pin and PSU provides 1.
  • PCIe generation alignment
    Motherboard PCIe Gen 4 supports selected GPU link generation.
  • Storage interface support
    M.2 NVMe is supported on the selected motherboard.

Direct component links

AMD Ryzen 5 8400FASRock A620M-HDV/M.216GB DDR5-5600 (2x8)Intel Arc B570650W 80+ Gold PSUCompact mATX TowerTower Air Cooler 154mm1TB M.2 NVMe SSD

Related decision paths

Budget PC builds
Solid configurations focused on value, not hype.
1440p gaming builds
Balanced builds for high FPS without overspending.
Graphics cards under 500
Direct GPU decision paths for value-focused setups.

Compatibility guides

If you want to validate CPU and motherboard compatibility or size your PSU correctly, start with these guide pages.

CPU and motherboard compatibility
PSU and GPU connector planning
Case fit: GPU length and cooler height

What this checker actually validates

  • CPU and motherboard must match exactly on socket type.
  • RAM is checked for both generation compatibility and realistic speed support.
  • GPU length and cooler height are validated against case limits.
  • PSU sizing uses estimated system draw plus safety headroom.

FAQ

Does this tool check real compatibility?

Yes. It validates socket fit, RAM type and speed sanity, case clearance, cooler fit, PSU headroom, connector needs, and storage support.

Does the tool show prices?

No. OverLKD avoids visible prices on tool pages. Check live pricing and availability directly on Amazon.

Can it validate every edge-case build?

It covers mainstream build paths. For edge cases like extreme overclocking or niche workstation parts, add a manual sanity pass.